Hello,
I am hoping that you guys can help me with a problem I am having adding a standard D12-100 receiver.
I have a Slimline 5 LNB with 4 cables coming out. These are fed into a Zinwell WB68 multiswitch. From the outputs, I have 2 cables running to each (2) of my HR21-700 receivers, and 1 cable running to a D12-100.
The D12-100 was only getting the odd transponders, so I went and changed the input wires around, and now the D12-100 is not getting any satellite signal at all.
The HR21-700's are fine on both Ku and Ka.
Your help will be appreciated.
I am hoping that you guys can help me with a problem I am having adding a standard D12-100 receiver.
I have a Slimline 5 LNB with 4 cables coming out. These are fed into a Zinwell WB68 multiswitch. From the outputs, I have 2 cables running to each (2) of my HR21-700 receivers, and 1 cable running to a D12-100.
The D12-100 was only getting the odd transponders, so I went and changed the input wires around, and now the D12-100 is not getting any satellite signal at all.
The HR21-700's are fine on both Ku and Ka.
Your help will be appreciated.
