Hello-
I have been searching for information on how to align a separate DISH 500 with a dual Pro head to get the 129 sat. I have found bits and pieces but I have a couple of questions- There are so many people on this forum with so much knowledge - I would definitely appreciate any help!
I live in North GA zip 30582. I have a 1000.2 and have a hard time keeping a decent signal on the 129 sat. I would like to try a separate 500 to see if I can get a better signal. My questions are:
- Do I leave the 500 skew the same as when I was receiving 110/119 or do I turn it to 90 and not use the skew when I go for the 129? I read that the 129 is about 5 degrees lower and about 10 degrees to the right (from the rear) of the 110/119 position but I didn't know what to do with the skew.
- Using the DP dual - Should I use the 119 output when trying to get the 129?
- What would the correct elevation for my location?
- Assuming I get a decent signal on the 500. I can then run the signal to the LNB input on my 1000.2 triple head. I assume I need to cover the 129 head on the 1000.2 with foil so it will not confuse the system?
- I also have a single DP LNB head and mast adapter. Would it be better/easier to use a single LNB head or the dual LNB head on the 500 DISH. Both are DISH PRO.
- Is it true that the 129 is a failing satellite? How can DISH rely on something like that for the HD channels? When will it be replaced? Will it still be at 129 location or somewhere else?
Thanks in advance for any help!!!
I have been searching for information on how to align a separate DISH 500 with a dual Pro head to get the 129 sat. I have found bits and pieces but I have a couple of questions- There are so many people on this forum with so much knowledge - I would definitely appreciate any help!
I live in North GA zip 30582. I have a 1000.2 and have a hard time keeping a decent signal on the 129 sat. I would like to try a separate 500 to see if I can get a better signal. My questions are:
- Do I leave the 500 skew the same as when I was receiving 110/119 or do I turn it to 90 and not use the skew when I go for the 129? I read that the 129 is about 5 degrees lower and about 10 degrees to the right (from the rear) of the 110/119 position but I didn't know what to do with the skew.
- Using the DP dual - Should I use the 119 output when trying to get the 129?
- What would the correct elevation for my location?
- Assuming I get a decent signal on the 500. I can then run the signal to the LNB input on my 1000.2 triple head. I assume I need to cover the 129 head on the 1000.2 with foil so it will not confuse the system?
- I also have a single DP LNB head and mast adapter. Would it be better/easier to use a single LNB head or the dual LNB head on the 500 DISH. Both are DISH PRO.
- Is it true that the 129 is a failing satellite? How can DISH rely on something like that for the HD channels? When will it be replaced? Will it still be at 129 location or somewhere else?
Thanks in advance for any help!!!