I may use a old dish with the H24 for camping this weekend. If I do, will I need to use the PI and B band converter? I understand that I will only get SD picture.
H24 with OLD Dish
- Thread starter davidmustang
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 757
No . ...
No PI, as the old 101W round dish only uses 13v/18v legacy switching signals from the receiver . ....
And no BBC needed either, as those are only used for receiving Ka B-band HD (and some SD) signals from the 99 and 103W satellites by equipment operating in legacy mode.
Sent from my LM-V600 using Tapatalk
No PI, as the old 101W round dish only uses 13v/18v legacy switching signals from the receiver . ....
And no BBC needed either, as those are only used for receiving Ka B-band HD (and some SD) signals from the 99 and 103W satellites by equipment operating in legacy mode.
Sent from my LM-V600 using Tapatalk
Thank you for the information. Do you know what set up I need under the satellite. I know I use 18 inch round receiver, but what switch setting?
Use the "SL-3" dish setting ...
And perhaps set your guide preferences for "Hide HD channels" ....
Switch setting should be on "Multiswitch". ...
Sent from my LM-V600 using Tapatalk
And perhaps set your guide preferences for "Hide HD channels" ....
Switch setting should be on "Multiswitch". ...
Sent from my LM-V600 using Tapatalk
Your going to use a Non SWM set up now, your still going to point at the 101 Sat.
Use the setting I posted the other day, minus the Tilt.
Use the setting I posted the other day, minus the Tilt.
