Gearing up for the next contract negotiations with Dish, Equipment change

  • Server Issues.

    We are very aware that there have been system issues the past few days. In troubleshooting the system, it has been determined that the issue is at our provider and is hardware related. As of 12:05 PM ET our provider has moved us to a new server.

    Things seem to be running better on this new server. However in trying to diagnose the issue (before finding out it was a hardware issue) we made some system changes which we need to undo. So if you find any issues or errors please let us know in the Operations Center Forum.

    Thank you for your patience! Sorry for the issue!
    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

H2Guy

SatelliteGuys Family
Original poster
Dec 28, 2022
91
100
Santa Fe
I have been using old and outdated equipment for a long time and would have switched out to the Hopper and other associated new stuff but here's the rub, my monthly rate would literally double.

Obviously they could not sell me on this. Anyway, my current configuration is two 922 receivers and a wally, (I also have a second Wally for my RV which is currently spare)

So, here's what I want to do, use the single 922, and the 2 wally's. First this should drop my monthly rate because Pay for 2 outputs for each 922, and eliminating one of these and swapping in a Wally would only count as one.

Now the big question will my current dish (which I think is a dish 500) support the single 922 and 2 wally's? I would switch over to a newer system but don't want the additional cost, plus I think in the future I will end up just dumping satellite all together and move to streaming full time. Thoughts please?
 
Top