Galaxy 19 Freq 12060

[cyder]

Hi,

I have been trying to pick up RTP on Galaxy 19 with no luck. It picked it up in the spring but since my parents came back I have not been able to pick it up. I am using a Viewsat ultra. It can pick up some channels on Galaxy 19 but when I go to the Channel Scan it shows no quality for Frequency 12060, only the lower frequencies seem to be getting any quality.

I tried manually entering the channel but it shows a 0 quality.

Is this due to my dish being nudged slightly off? I thought all channels would be lost not some. The dish seems pretty secure and tight.

Antenna Setup
Galaky 19
Universal
LNB High / Low 10600 / 9750
TP Freq 11874 (seems to be the highest one with quality)


RTP
Freq 12060
SR 22000
H
3/4
2001/3001/4001

Thanks for any thoughts or ideas you might have

 

[Mauiguy]

What type of LNB/LNBF are you using?

 

[cyder]

What type of LNB/LNBF are you using?

Input Freq 11.7-12.75
Low 10.7

It was able to pick up RTP on this satellite before in the spring. I obviously dont know much about LNBs but I hope I answered you.

 

[Lak7]

Go into the receiver's Sat Setup Menu, and change the LNB Freq to match your LNB - something like Standard and 10700
Look carefully on the LNB, make sure you are reading the L.O. correctly, "normally" for FTA it's 10.750

 

[Mr Tony]

yeah it sounds like the LNB LO is set wrong. Should be SINGLE (or STANDARD) and 10750

 

[cyder]

Thanks guys, that gave me some quality on that frequency. I guess I have to nudge the dish to get it over 50% since RTP still isn't coming in.

 

[Mr Tony]

yes I would try and nudge it a bit. But youre close