Galaxy 10R - TP 5 reception good - no TP1 reception

[cebu22]

Hi,
I'm able to receive Galaxy 10R programming on TP5. Unfortunately, I'm unable to receive any programming on Galaxy 10R on TP1. Is this a common problem? I'm using a 30" FORTEC dish, coolsat 4000 pro receiver, and a motor (USALS) - Boston area. If I attempt to peak the dish for Galaxy 10R - TP1 should I start with the azimuth or elevation angle. I'm concerned about
changing the dish's setting since all other satellite are being tracked successfully using USALS - maybe small changes in azimuth/elevation would be tolerable.

Thanks - I love this stuff

 

[gong]

I have the same problem with mine

Hi,
I'm able to receive Galaxy 10R programming on TP5. Unfortunately, I'm unable to receive any programming on Galaxy 10R on TP1. Is this a common problem? I'm using a 30" FORTEC dish, coolsat 4000 pro receiver, and a motor (USALS) - Boston area. If I attempt to peak the dish for Galaxy 10R - TP1 should I start with the azimuth or elevation angle. I'm concerned about
changing the dish's setting since all other satellite are being tracked successfully using USALS - maybe small changes in azimuth/elevation would be tolerable.

Thanks - I love this stuff

If I make the setup peak on TP1 for Galaxy 10R, I won't able to track the arc right and some satellite I can't view. When I get all the satellites, I won't able to get enough signal on TP1 for Galaxy 10R

 

[Mr Tony]

11719 (TP1) is lower than the rest due to a Dish Network satellite at 121 (there is a 11720 V on 121 too which goofs up the G10 one)

try to tweak it...nudge the dish one click E or W on the receiver and see if that works. Otherwise, you might have to tweak it by hand.