GEOSATpro DSR-R100b flashing 56:66 on front panel

[SteveGreer]

DSR-R100b flashing 56:66 on front panel. Red LED light (lock) is on. Unit has been working fine for over 6 years but now is not processing any signal from my dish (If it's getting one; I don't know if it is getting anything from the dish at the moment). Does anyone have any idea what's going on with this unit?

 

[primestar31]

Titanium Brian, do you remember this receiver? Appears to be a rack mount. I found a manual online, but it doesn't mention error codes, etc.

 

[SteveGreer]

That's right, The unit is rack mounted, and I have the manual which contains no troubleshooting guide or error codes.

 

[primestar31]

That's right, The unit is rack mounted, and I have the manual which contains no troubleshooting guide or error codes.

Brian is likely to know since he used to own SatelliteAV, however, he usually takes the weekends off. So, you might not get an answer until at least tomorrow.

 

[Titanium]

Sorry, don't have the dev materials on the unit anymore. Possibly LNB power fault?

If a power cycle doesn't restore, I would call SAT AV support.