Still mulling around the dual C-Band LNBF but had an idea.
If I want to combine the Networks from G4 and the Equity stuff on G10 to go to 3 or 4 receivers I would need
-4 way splitter for G4
-2x4 multiswitch for G10
-3 or 4 diseqc switches
-cable to go from the splitters to the Diseqc
-DC blocks
but I thought about this.......
If I take the cable from the C-Band and put that into the "18V" side of the 2x4 multiswitch and put a cable from the G10 dish to the "13V" side of the same multiswitch...that would work, right? If I say "V" tranponder, it would go up the 13v side to the G10 dish and if I say H it goes up the 18v side to the C-Band.
Since the nets are on H on G4 and the Equity stuff is on V that should work and I wouldnt need all the extra switches. Right?? Anybody try this?
If I want to combine the Networks from G4 and the Equity stuff on G10 to go to 3 or 4 receivers I would need
-4 way splitter for G4
-2x4 multiswitch for G10
-3 or 4 diseqc switches
-cable to go from the splitters to the Diseqc
-DC blocks
but I thought about this.......
If I take the cable from the C-Band and put that into the "18V" side of the 2x4 multiswitch and put a cable from the G10 dish to the "13V" side of the same multiswitch...that would work, right? If I say "V" tranponder, it would go up the 13v side to the G10 dish and if I say H it goes up the 18v side to the C-Band.
Since the nets are on H on G4 and the Equity stuff is on V that should work and I wouldnt need all the extra switches. Right?? Anybody try this?