DishPro 34" & FSS LNB aimed @ 97

[acuevas]

Hey All,

I understand above dish is usable for Galaxy 19( 97 sat ). I have aimed it already and I am coming up short. Any ideas will certainly help, thanks. ( see pics below - sorry not the best)
My settings for Brea, CA are: EL 44.6 / AZ 132.3 / SK -27.9R

 

[Mr Tony]

OK the settings are right but you need to select a VERTICAL transponder when aiming.

12177 V 23000 works well

bandstacked LNB's take the H side and "stack" them above the vertical so honestly the frequency wont be right on horizontal polarities..they will be higher

But otherwise it looks good for the settings

 

[acuevas]

Thanks Iceberg,

Here I am trying to use a VERTICAL transponder, as you suggested, but I know I am not doing something right for I still get red bars.

 

[Mr Tony]

The bars will turn green when you lock on the signal

Otherwise try a blind scan and see if you pick up any channels. Regardless of what sat you are on, the blind scan should pick up something

 

[acuevas]

Thanks Iceberg,

As always your help is much appreciated.

 

[Gary Z]

Is it just me or does the LNB seem to be aimed incorrectly... looks like it is tilted downward some?

 

[Mr Tony]

It looks like the LNB is on the stock setup just the covering is gone. Might just be that way due to the picture