Hi, I just bought the prepaid DishNOW package for installation in a rural, 2nd home site. I got the DP301 receiver and Dish500 package from Radio Shack with a $40 pin card. I was able to set up the satellite and get a good signal.
But I can't actually get the service activated properly. I called in the Pin number and got a Dish talking head but every channel I'm supposed to get gives me an Alert-014 that the channel isn't paid for. I've spoken to 5 different technical support/customer service staff and have been told 5 different things (including take the problem up with Radio Shack).
I also noticed that when I accessed the guide to get channel info, I was getting GMT time and not my local time.
One CSR did ask me to check the software (DASNP) and it's an older version that needs updating. I thought the software update had taken place since I saw a message to that effect but apparently not. (For a brief moment, I lost the signal and that have been aborted the software update.) One person told me to turn off the receiver for 20 minutes and then turn it back on. One person told me to wait 20 minutes while he sent me a signal and then remove and re-insert the smart card (purple stripe). One person told me to turn off the receiver and wait 20-30 minutes and it would come back on after the software update.
So far, nothing is working. I'm not sure what to do. Could this be a receiver problem? Should I get a professional installer to check the system out? Is there a simple fix to get the software updated? Please advise. Thanks.
But I can't actually get the service activated properly. I called in the Pin number and got a Dish talking head but every channel I'm supposed to get gives me an Alert-014 that the channel isn't paid for. I've spoken to 5 different technical support/customer service staff and have been told 5 different things (including take the problem up with Radio Shack).
I also noticed that when I accessed the guide to get channel info, I was getting GMT time and not my local time.
One CSR did ask me to check the software (DASNP) and it's an older version that needs updating. I thought the software update had taken place since I saw a message to that effect but apparently not. (For a brief moment, I lost the signal and that have been aborted the software update.) One person told me to turn off the receiver for 20 minutes and then turn it back on. One person told me to wait 20 minutes while he sent me a signal and then remove and re-insert the smart card (purple stripe). One person told me to turn off the receiver and wait 20-30 minutes and it would come back on after the software update.
So far, nothing is working. I'm not sure what to do. Could this be a receiver problem? Should I get a professional installer to check the system out? Is there a simple fix to get the software updated? Please advise. Thanks.