Dish Pro 500

[pec]

We have a DP 500 dual LNB and a 625 receiver, will this set up work as is? We have one cable from the 119 side of the dish to the separator on the receiver that goes to the sat input one and two.

We can get 119 and 110 but not at the same time. Do we need a different LNB?

 

[Bob Haller]

yeah dish pro plus LNB, just one cable needed.

or run a seconce cable to your existing LNB, it should have 2 outputs

 

[pec]

Bob, thanks for the information. We'll get a Dish Pro Plus LNB.

 

[Mr Tony]

you could just run a 2nd line and be done with it

If you do go with the DPPTwin route, you also need a DishPro SEPARATOR so you can run one line from the LNB to both inputs on the receiver. This isnt a regular splitter. Its a Dish specific product

 

[Bob Haller]

you could just run a 2nd line and be done with it

If you do go with the DPPTwin route, you also need a DishPro SEPARATOR so you can run one line from the LNB to both inputs on the receiver. This isnt a regular splitter. Its a Dish specific product

OP said he already had the seperator.

myself I would run the second line........