Dish Network DVR625 Question

[sp1974]

I currently have a DVR625 reciever. It controls 2 TVs obviously. Can I splice of the line for tv 2 to a third tv to have the signal work on it also. If so is it as simple as splicing off the line or is more required.

 

[stimpson]

Just use a splitter from the TV 2 out run one to each TV. You may already know this but both TVs from the TV 2 out will have to watch the same channel. You can also do a search for this. I know some one has posted a diagram for this before if you need a visual aid for this. (Edit) I just saw a few posts up from this one some is asking the same thing, but with a 622. The is a drawing in one of the replys you could use.

 

[sp1974]

Yeah I know it will have to be on the same channel its for an office so it will be all good. Thanks for the reply. I figured just a splitter sounded to easy and things never work out that way for me. Now I have a project for the weekend.

 

[RandallA]

In that other thread it's mentioned that you can add another splitter at TV3 and split the TV signal and the remote antenna. Of course you will need an extra UHF antenna and an extra remote but that will make things a lot easier controlling the receiver from the TV3 location.