The other day Dish Network cut off 3 of my 4 receivers. They left me a message to call an 888 number. I called from work and they said that in order to reactivate the receives I have to be on the phone with them and read back a series of numbers to them that they send through to the receivers. They said that they periodically audit customer's receivers. What are they up to? I don't have the receivers hooked up to phone lines as there are no phone jacks near the receivers and one of them in is my camper. The guy on the phone said that it was no big deal that they are not hooked up to a phone line. Any advice is appreciated as to what is going on.
Dish Network Auditing me
- Thread starter xomo
- Start date
- Latest activity Latest activity:
- Replies 57
- Views 38K
- Status
Sometimes Dish does that. When I had 4 receivers, they called me and had me read off the R & S #'s
Reason is people do account sharing. They have a receiver not int the same area as the others. As an example, we have one receiver at our cabin all the time (the other 2 are at the house). Technically this is a no no, but people do it.
Reason is people do account sharing. They have a receiver not int the same area as the others. As an example, we have one receiver at our cabin all the time (the other 2 are at the house). Technically this is a no no, but people do it.
umm, pretty sure i can have a reciever at my cabin or my humvee or motor home or any of those other things i dont have, I never read anywhere that they have to be in one house or one garage or machine shed, i dont think i am going to pay 4 different accounts just cause its another building, cable wouldnt do that.
Odi - that's IF all they ask is the R & S numbers. If they were to ask the location code - which changes often, maybe even under their control on a whim, that'd be a different story.
SimpleSimon said:
What's a "location code?" Is it possible that if I have all receivers in the same location when I report to Dish that they will be able to tell that receivers were previously in different locations? Just trying to avoid getting burned here.
The location code is simply a random set of numbers on the Sys Info screen. As long as you're legit, you have nothing to worry about. The numbers do change, so you'll have to be on the phone with them and have the numbers available to them.
Location ID is the last item on the system information screen, DISH has been using this for several years to control locations. If you have three of four receivers at home and number 4 at a vacation home you won't be able to give the 4th location id on the phone so that receiver stays shut off.
The other day, I discovered that Dish de-activated my employer's 3 Dish receivers! (We use both D and E. But, the building I'm responsible for has E stuff.)
I contacted our AP dept., got our account number, and called Dish commercial services. They could not tell me why they were disconnected! They confirmed what our AP told me, which is that we were paying our bills on time. They just closed our account, and stopped billing back in April for no reason!!! I wonder if it was one of these audit deals? (They probably couldn't get a hold of the right person here.)
It's a good thing our CEO or exec staff hasn't wanted to watch CNBC or something. I can just picture the CEO (or his admin, more likely) yelling my name, resonating throughout the building, like Mr. Spacely yelling "JETSON!".
I contacted our AP dept., got our account number, and called Dish commercial services. They could not tell me why they were disconnected! They confirmed what our AP told me, which is that we were paying our bills on time. They just closed our account, and stopped billing back in April for no reason!!! I wonder if it was one of these audit deals? (They probably couldn't get a hold of the right person here.)
It's a good thing our CEO or exec staff hasn't wanted to watch CNBC or something. I can just picture the CEO (or his admin, more likely) yelling my name, resonating throughout the building, like Mr. Spacely yelling "JETSON!".
cl1986, If I remember my DISH rules from when I installed for them it said that you are required to have a constant telephone connection for all receivers from the same phone line. Now I know that a whole lot of people don't do that and get away with it but I think they will shut your non-connected receivers down if you get caught. As for the mobile set-up you mentioned, I thing you need an RV or "over the road" truck waiver to get away with that.
cl1986 said:
Call your cable co. and tell them you need a second outlet installed, 200 miles away at your weekend place, tell them you need a third outlet in your humvee, tell them you need a fourth drop in your motor home (make sure they leave LOTS of extra wire), make sure all this is on the same account.
After you talk to them get back to us and let us know how hard they were laughing at you
Are the location id's specific for the receiver you have or do they just check to see if you give them any location id that may have been sent down? I would think that the location id would be specific to the receiver that you would have and they would have the code for each one. I dont think its a matter of where it is at, just a matter of whether you can read off the numbers when they ask for them which means they would be at the same location.
Does DirecTv have anything similar location id's? I heard that they was requiring the phone line but quit requiring it unless you wanted NFL ticket or wanted to order PPV's.
Does DirecTv have anything similar location id's? I heard that they was requiring the phone line but quit requiring it unless you wanted NFL ticket or wanted to order PPV's.
3 words in the form of an acronym for anyone who's "sharing" an account - AIM
as for me... feel free to audit me dish when you read this. i'm not sharing. however, i'm not a fan of corporate strong-arming and turning OFF receievers THEN auditing is a BS tactic in my opinion. audit first, THEN turn off if user if found to be sharing.
as for me... feel free to audit me dish when you read this. i'm not sharing. however, i'm not a fan of corporate strong-arming and turning OFF receievers THEN auditing is a BS tactic in my opinion. audit first, THEN turn off if user if found to be sharing.
- Status
