DISH antenna stolen - twice. Help!!
- Thread starter Gooch
- Start date
- Latest activity Latest activity:
- Replies 67
- Views 9K
Definitely a possibility. I'm also looking at a "Simulated Security Camera" from Radio Shack for about $30. It looks like the real thing but it doesn't do anything except except blink a red light!!
Both cable and AT&T Uverse are available but neither have the international channels available on Dish.
When
When are they taking the dishes? If at night is the area dark? maybe some light will make them nervous.
When are they taking the dishes? If at night is the area dark? maybe some light will make them nervous.
In most towns that would get a pretty heafty fine. Due to the fact a kid could step in them and lose a foot.
Real cameras don't blink red lights. Good idea though... I'd go with a real camera combined with the alarm idea. Nice ideas!
I kinda like the idea of combining a couple of these solutions ... combining micro-switches to sense when the dish has been lifted, and then a electric fence unit good for say a dozen or so clicks of fence and then I think you will have a anti-theft solution.
I am assuming her town house is in an "apartment" kind of setting, that is the main reason we don't install on poles or tripods etc. in apt. complexes. They are easily accessible by anyone walking by and so tempting to punk kids.
A couple thoughts, a non-pen mount. Thats a "non-penetrating roof mount" like you see on the peak of the roof of mini-marts hold Hughes net dishes that run there lotto systems. They are held down to the roof by 6 or more construction bricks, and don't damage the roof at all. the mounts themselves are ~$100 but it will cost more than that in labor to have it installed. Also they are a bit of an eye-sore, and may not be allowed either. The other (and probably better) is a mount that looks kind of like this:
But it clamps to the 2x4 using no screws/bolts, we have one in our shop but I can't find a pix on-line for it at the moment.
Good luck,
Brad
A couple thoughts, a non-pen mount. Thats a "non-penetrating roof mount" like you see on the peak of the roof of mini-marts hold Hughes net dishes that run there lotto systems. They are held down to the roof by 6 or more construction bricks, and don't damage the roof at all. the mounts themselves are ~$100 but it will cost more than that in labor to have it installed. Also they are a bit of an eye-sore, and may not be allowed either. The other (and probably better) is a mount that looks kind of like this:
But it clamps to the 2x4 using no screws/bolts, we have one in our shop but I can't find a pix on-line for it at the moment.
Good luck,
Brad
It's on a townhouse and the association prohibits fastening anything to the roof
They also make a non-penetrating roof mount. Technically, it would not be "attached" to the roof.
Dont forget to put "Smile youre on camera" in reflective letters on the dish somewhere.
Booby trap the dish by electrifying it. If you a would-be thief gets killed and you get prosecuted, claim it was your attempt at a de-icer.
didnt know people actualy bothered steeling dish's. you can get a 20"dish n LNB were i live for 20 bucks. But if they keep trying to take em to like someone else mentioned.. Put some kind of pad lock, weld it or move it. those r the only options i see.. or if you dont mind watchin tv for a bit disconnect the cables and attach some serious voltage to the dish so who ever tries taking it gets a nice shot of voltage to their bodies.
Its probably some stupid installer taking the Dish and selling off the parts when he does a service call.
#1 Get the switch off the pole and inside the house. I see too many guys tie strap a DP33, DP34 or DP44 to the pole when doing a ground mount. You might as well just take a $50 bill to the pole because thats just how valuable these switches are.
#2 Get a good pole such as a gas pipe of water pipe and cement it in the ground. Fence pipe breaks off too easily. We use fence pipe for our ground mounts since its cheap, however I have done repos in under a minute with only a pair of wire cutters by breaking off the fence post from the ground.
#3 Replace all the bolts on the Dish with something other than 1/2 and 7/16. This is the only size wrenches that Dish installers keep on their trucks. Whoeever is stealing your Dishes has a 7/16 wrench in their pocket, changing the bolts to something other than 7/16 will force them to go back out their truck and they aint gonna go back with a wrench set and try several wrenches before the find the right one.
#1 Get the switch off the pole and inside the house. I see too many guys tie strap a DP33, DP34 or DP44 to the pole when doing a ground mount. You might as well just take a $50 bill to the pole because thats just how valuable these switches are.
#2 Get a good pole such as a gas pipe of water pipe and cement it in the ground. Fence pipe breaks off too easily. We use fence pipe for our ground mounts since its cheap, however I have done repos in under a minute with only a pair of wire cutters by breaking off the fence post from the ground.
#3 Replace all the bolts on the Dish with something other than 1/2 and 7/16. This is the only size wrenches that Dish installers keep on their trucks. Whoeever is stealing your Dishes has a 7/16 wrench in their pocket, changing the bolts to something other than 7/16 will force them to go back out their truck and they aint gonna go back with a wrench set and try several wrenches before the find the right one.
what he meant was, sometimes the local cable will give you a credit if you ditch your dish. so somebody could steal yours and then turn it in for the credit...
