Pittsburgh, PA Scan Results
ok, woke up this am and the bedroom box was on. I know I put it in standby before I hit the sack around 11:30. Turned on the tv and there it was, transparent menu! So I got new software upstairs now.
Well, I'm from Pittsburgh, PA, and I've been having trouble with my map to WQEDDT, so first thing I did was scan for channels. I watched as the progress bar stopped at ever channel I exepected to get along the way:
25, 33 (ok, I didn't expect this one, its in Morgantown, WV), 38, 42, 43, 48, 50, 51.
Finally, the list of channels that it has locked on to comes up, with what I had already mapped next to it:
25 2-1 KDKADT 98
38 13-3 WQEDDT1 94
38 80-3 PBS1DTV 94 (blinking sound)
42 22-1 WCWB-HD 93 42 22-1 WCWBHD
42 22-2 WCWB-SD 93
43 53-1 WPGH-HD 99 43 53-1 WPGHHD
43 53-2 WPGH-SD 99
48 11-1 WPXI 97 48 11-1 WPXIHD
50 40-1 WPCB-DT 97 50 40-1 WPCBHD
51 4-1 WTAE-dt 98 51 4-1 WTAEHD
Note the strangeness:
25 gets stopped at, existed in my mapped list, but never shows up in the scanned channel list and when I check the signal the signal strength by using the red button from this screen instead of the green save and continue, it's signal strength comes out at 98 solid.
38 which was in my map as 13-3 but never tuned in, comes in on the scan as 80-3 PBS1DTV. Eighty dash threed!!? There's no vhf or uhf frequency of 80 is there? It's supposed to be getting 13-3 13-4 and 13-5, which are what my tv's internal digital tuner picks up.
My mapped 42 and 43 were the SD versions of the channel, even though the channel guide said it was the -1 channel and that it was HD. With the scan, those channels got the -2 subchannels added and the -1 is now the HD and the -2 is the SD. I can tell my the sidebars on -1 this am that I didn't get before the scans.
48, 50, and 51 were already in my map and showed up in the scan also, unlike 25 which was in my map and didn't show up in the scan.
A new channel 33 showed up which is in Morgantown West Virginia, a fair distance from me. It's getting an alternating 0 and 81 for signal strength. Lockon says it needs to be between 80 and 85 (is there anyway to adjust this? I get channels to display correctly on my tv's internal digital tuner at signal strengths anywhere from 40 up). It's another PBS station. And titantv says I should be able to get it. Titantv says I should be getting -1 -2 and -3.
And finally, no abcnews channel. I guess my local isn't carrying it yet. 51 is my local abc station in HD, and there were no other sub channels besides the -1.
All in all, I'm pretty disappointed that this scan feature didn't pick up my WQED even though it has the signal strength way higher than the lock on required. And whats up with this 80-3 stuff. Did the voom receiver just make this up because it already had a 13-3 in the map. And where is -4 and -5, and -6. Titantv says I should only be getting -3, -4, and -5, but I get -6 on my tv's internal digital receiver as well.
