Perhaps someone can give me some tips...
My existing setup was a single 20" dish with a DishProPlus Twin for both 91 and 82. Of course, you all know the signal for 82 has dropped off the planet for many places (I'm in the NYC area).
So I had picked up a 90cm Fortec Star and outfitted it with a DishPro Dual lnb and connected it to the input port of the DishProPlus Twin.
My receivers (9241 and 5900) both report that the connections with the DPP Twin and DP Dual are good but, but I - for the life of me - am unable to find 82 with my new bigger wing dish. I've connected my receiver directly to the 90cm dish and I still have no luck finding the satellite. The 20" dish is still getting 91 and some 82 transponders - so I know it's out there somewhere - but I was thinking it wouldn't be so hard to find 82 with this bigger dish.
So, anyway - when I view the setup in the system info screen, it looks like it identifies the third input as 61.5, which I had feeling I ended up pointing to in frustration before calling it a night. However, in the Check Switch screen - it doesn't identify the third input as any satellite (just an X) but the "transponder" row is green, and the lnb is correctly identified.
Does anyone have any ideas? Theoretically this should work, no?
Another question is - if and when I do finally find 82 on the 90cm dish, will it be a problem for my receiver to see 82 from both the DPP Twin on the 20" dish, as well as from the DP Dual on the 90cm dish simultaneously? Or will I need to cover the 82 lnb on the DPP Twin whenever I do a check switch?
Thanks for any advice. . . I've swear I feel like I scanned the whole sky looking for 82 on this dish - meanwhile I'm still getting the few transponders I still can on the 20" dish. I thought it would be easy to find.... not!
My existing setup was a single 20" dish with a DishProPlus Twin for both 91 and 82. Of course, you all know the signal for 82 has dropped off the planet for many places (I'm in the NYC area).
So I had picked up a 90cm Fortec Star and outfitted it with a DishPro Dual lnb and connected it to the input port of the DishProPlus Twin.
My receivers (9241 and 5900) both report that the connections with the DPP Twin and DP Dual are good but, but I - for the life of me - am unable to find 82 with my new bigger wing dish. I've connected my receiver directly to the 90cm dish and I still have no luck finding the satellite. The 20" dish is still getting 91 and some 82 transponders - so I know it's out there somewhere - but I was thinking it wouldn't be so hard to find 82 with this bigger dish.
So, anyway - when I view the setup in the system info screen, it looks like it identifies the third input as 61.5, which I had feeling I ended up pointing to in frustration before calling it a night. However, in the Check Switch screen - it doesn't identify the third input as any satellite (just an X) but the "transponder" row is green, and the lnb is correctly identified.
Does anyone have any ideas? Theoretically this should work, no?
Another question is - if and when I do finally find 82 on the 90cm dish, will it be a problem for my receiver to see 82 from both the DPP Twin on the 20" dish, as well as from the DP Dual on the 90cm dish simultaneously? Or will I need to cover the 82 lnb on the DPP Twin whenever I do a check switch?
Thanks for any advice. . . I've swear I feel like I scanned the whole sky looking for 82 on this dish - meanwhile I'm still getting the few transponders I still can on the 20" dish. I thought it would be easy to find.... not!