Can I use a SW-21X to add 61.5 to 110/118.7 ?

[f13dfx]

I'm using a modified setup with an 33" eliptical dish to get 110 and 118.7 combined via SW-21. Can I add 61.5 with the use of a SW-21X. And which sats would I connect with the SW-21X?

I am using this setup on a 622 HD-PVR. I've had it with 129, so it isn't an option.

Thanks to those who reply.

 

[Sadoun]

Yes, the SW21X will give you that capability.

 

[f13dfx]

Do I connect 110 and 118.7 to the SW-21X and the line out to one of the ports in the SW-21?

Yes, the SW21X will give you that capability.

 

[boba]

That should woek as long as all your LNBs are LEGACY.

 

[KKlare]

Legacy uses SW21 (and SW64) not (Dish Pro) DP21 switches. Different switching methods. You should know that Boba.
-Ken
Apologies, OP does have Legacy. -K

 

[f13dfx]

Okay, for the most part the following has been working since December:

110 & 61.5 connected via SW-21X
output from SW-21X & 118 connected via SW-21
output from SW-21 connected to 622 receiver

I just have one nagging problem in that the Detroit network Conus feeds (6459 to 6462) seem to only work intermittently. Sometimes when I tune to any of these channels I get the "acquiring satellite signal" message which then gives me the following message:

"Sorry for the interruption. There is no need to call us. We are working to have this channel back as soon as possible. You may still watch non-local programming by pressing the GUIDE button on your remote control and selecting another channel."

It's kind of a puzzle and I don't know what else to try at this point. Should I try using different satellite combinations when using the SW-21 and SW-21X switches?

Your help would be greatly appreciated!