Can you connect an FTA dish to a C-Band receiver and get KU thru the C-Band receiver? I know the motor wouldn't work but would you get signals thru the C-Band receiver??? Just curious.
C-Band Receiver and FTA
- Thread starter jself1982
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 6K
- Status
sure you can (with a twist)
most C/KU analog boxes can not change polarity of a LNBF (the LNB's most of us use). So they are defaulted to H polarity if hooked up directly. IN those cases, you need to slave it from your digital box.
If you use an old LNB with the 3 wires for polarity (older C Band dishes use these), then you could
most C/KU analog boxes can not change polarity of a LNBF (the LNB's most of us use). So they are defaulted to H polarity if hooked up directly. IN those cases, you need to slave it from your digital box.
If you use an old LNB with the 3 wires for polarity (older C Band dishes use these), then you could
- Status
