BSC-421 C-Band LNBF

Status
Please reply by conversation.

PSB

On vacation
Original poster
Nov 5, 2003
3
5
My BSC-421 C-Band LNBF just arrived!

Took some signal readings from where I was parked (G4R) while using the ASC-421.
I swapped over to the BSC-421 and immediately seen an increase in signal quality on EVERY transponder.

Seems that with the new BSC technology everything is on one chip, increasing the reliability and signal quality! Works for me!

I have not even tried tweaking the LNBF at all yet, this should really help with the weaker C-band signals, 13k noise level.


G4R

WB HD was getting 58% JUMPED to 76% Quality

Nets was 52% now 61% Quality

ABC HD was 61% now 64% Quality

"The above signals were on the DVB World USB receiver, so lower signal levels than most STB receivers."
 

Attachments

  • Pict0115.JPG
    Pict0115.JPG
    21 KB · Views: 706
  • Pict0113.JPG
    Pict0113.JPG
    30.7 KB · Views: 723
  • Pict0102.JPG
    Pict0102.JPG
    34.8 KB · Views: 799
  • Pict0088.JPG
    Pict0088.JPG
    23.4 KB · Views: 690
  • Pict0083.JPG
    Pict0083.JPG
    17.9 KB · Views: 703
  • Pict0077.JPG
    Pict0077.JPG
    26.3 KB · Views: 637
  • Pict0073.JPG
    Pict0073.JPG
    26.3 KB · Views: 613
Last edited:
Pete
Is the unit heavier than the ASC421?

On my 6 footer, I have the LNB pushed in to the "38" line for optimum signal
 
ASC-421 = 12oz or 350g

BSC-421 = 9.5oz or 275g

The BSC-421 is also longer at 7" compared with the ASC-421 at 6"
 
BKP said:
Is that on your 6' mesh..

Yes, just noticed the 76% signal quality on WB HD has jumped to 79% quality today :up

I put he ASC-421 on my skewable Globecast dish for kicks and giggles :)
 
Status
Please reply by conversation.

Interesting Diseqc problem

A Motor On The 12' And 10' Mesh Dish

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts