We just released version 1.15 of our firmware for the AzBox miniMe American edition. It includes the following enhancements over our previous 1.10 (i.e. 1.1) version:
- Reverted to the same DVB drivers we were using in version 1.0 due to stability issues.
- Blindscan start and end frequency values now correctly default to the maximum frequency range based on the configured LNB type used by the currently tuned satellite.
- Manual transponder scan now has the currently tuned satellite and transponder selected by default.
- Changed Provider channel group scan mode factory default option to "Leave current" in order to prevent confusing people.
- Changed Scan type factory default option to "All services".
- Organized Antenna setup options into groups in order to simplify configuration.
This release also includes the following enhancements brought over from version 1.10 which we now have removed from our server:
- Added audio chime when receiver boots up or resumes from standby. This fixes the issue with certain high bitrate feeds pixelating such as CBS by properly initializing the multimedia drivers.
- Assigned default remote control buttons (i.e. |<< and >>|) in order to page up or page down the channel list.
- Blindscan range now automatically uses valid default values based on the current satellite's configured LO value. For C-band satellites, 3700 to 4200, for Ku-band satellites using a standard 10750 LNBF, 11700 to 12200 and for a universal Ku-band LNBF, 10700 to 12200.
- Added SatelliteGuys Radio to the online radio player for some GREAT holiday tunes.
- Added option to sort channel list by channel number. When the channel list is displayed, you may use the green button to sort channels either alphabetically, by transponder frequency, by satellite and now by channel number.
- Miscellaneous cosmetic and bug fixes.
Please note that after exiting the video or recordings player to watch satellite channels again, there might be a delay of up to 30 seconds before the media drivers releases control back to the tuner so please be patient. Also once you exit back to TV mode, the channel you were previously watching might not come back until you change to another channel and back again. This is a multimedia driver issue and we are waiting to get updated drivers from Sigma in order to fix this issue.
You may install this update either via USB by downloading the firmware file from the
support section of our website or using online update if you have your receiver connected to the Internet.
IMPORTANT: This update can ONLY be installed on the AzBox miniMe American edition. Firmware won't flash on non American edition miniMe devices.
Best regards,
PwrSurge
AzBox Canada
- Reverted to the same DVB drivers we were using in version 1.0 due to stability issues.
- Blindscan start and end frequency values now correctly default to the maximum frequency range based on the configured LNB type used by the currently tuned satellite.
- Manual transponder scan now has the currently tuned satellite and transponder selected by default.
- Changed Provider channel group scan mode factory default option to "Leave current" in order to prevent confusing people.
- Changed Scan type factory default option to "All services".
- Organized Antenna setup options into groups in order to simplify configuration.
This release also includes the following enhancements brought over from version 1.10 which we now have removed from our server:
- Added audio chime when receiver boots up or resumes from standby. This fixes the issue with certain high bitrate feeds pixelating such as CBS by properly initializing the multimedia drivers.
- Assigned default remote control buttons (i.e. |<< and >>|) in order to page up or page down the channel list.
- Blindscan range now automatically uses valid default values based on the current satellite's configured LO value. For C-band satellites, 3700 to 4200, for Ku-band satellites using a standard 10750 LNBF, 11700 to 12200 and for a universal Ku-band LNBF, 10700 to 12200.
- Added SatelliteGuys Radio to the online radio player for some GREAT holiday tunes.
- Added option to sort channel list by channel number. When the channel list is displayed, you may use the green button to sort channels either alphabetically, by transponder frequency, by satellite and now by channel number.
- Miscellaneous cosmetic and bug fixes.
Please note that after exiting the video or recordings player to watch satellite channels again, there might be a delay of up to 30 seconds before the media drivers releases control back to the tuner so please be patient. Also once you exit back to TV mode, the channel you were previously watching might not come back until you change to another channel and back again. This is a multimedia driver issue and we are waiting to get updated drivers from Sigma in order to fix this issue.
You may install this update either via USB by downloading the firmware file from the
support section of our website or using online update if you have your receiver connected to the Internet.
IMPORTANT: This update can ONLY be installed on the AzBox miniMe American edition. Firmware won't flash on non American edition miniMe devices.
Best regards,
PwrSurge
AzBox Canada
Last edited:
