Anyone making a spring FTA "to do list"?

Toggle sidebar
Status
Please reply by conversation.
I call this time of year "dish planting season" and I am expecting a bumper crop this year. :)

During the winter we moved from Florida to Pennsylvania, so I have none of my FTA dishes up and running. I hope to install at least 4-5 of the 14 dishes that we had shipped here during the move.
 
well lets see...since it was 70 today

-redid all the cabling. I installed my 8x1 switch and hooked up most of the LNB's to it
-moved the 36" dish to the roof for G10/119
-installed a 4x4 switch behind the C-Band dish and ran the cabling to that
-ran wires from roof (G10/119) to respective switches (G10 to 4x4, 119 to SW21)
-removed some cabling and switches from the top of the table
 
I have 2 KU dishes in the garage I want to put up, I just bought a dish (circular) lnb at a hamfest for $5.00 so I want to get that going this year. I also really really want to get a C-band dish up this year, I have an analog reciever in the closet and want to get thet going (as soon as I swap out all those darn universal lnbfs).

I also want to experiment with putting to gather muli-feed brackets on my existing dishes.
 
I am moving my motorized dish to a 5ft pole I am putting in the yard so I can view the whole sky with one dish.

I am also re-running and burying cable.

I also am going to run 3 RG6 cables to each bedroom, the living room, and kitchen.
Have them all goto a central location.
 
got all my cable buried but .... i have to work all weekend :( maybe everyone else can enjoy the weather and do some FTA stuff... i will be setting up several stationary mounts next week and probably be mounting a new pole for my old 10 ft dish.
 
Got most of mine finished up yesterday. Replaced the corotor on the 10' dish with a BSC621. It is now an FTA only dish! This has been a dream of mine since about the time I put it in 3 years ago. The 1.2 meter is now supplying the 4DTV receiver with X4 Ku. Built a media center PC and am watching Ku4DTV through the media center. Better guide and pvr capability!

Only thing left to do is install a "stealth" Primestar dish fixed on Galaxy16 @ 99W (RIP G4R) for the 4D and in turn free up the 1.2 meter for motorized Ku again. Big dish will be able to do C and Ku FTA, but will be mostly used for C. Probably will get parked on AMC3@87W for TVU or Echo13@121W for the muxes there.
 
Ive got to run some new cables and replace my ailing motor...
 
I need to rewire my rat nest of cabling and do some serious cable management. I finally got the setup to pull most all that I could ever want...be it analog, digital, 4:2:0, 4:2:2, or HD. Now I need to just make it pretty, and to sell off the equipment that I don't currently use.
 
Sadoun said:
This Spring, I will be installing a 180cm dish on an H180 HH Motor.
Click to expand...
I sure as heck wish someone would !
I'm itchin' to read more about that . :cool:

...and your new Vbox variant, too.
There are certain things that -could- be done with those...
... but it's just a waiting game to see what happens.

Of course, that'd all get a thread by itself....
 
Spring FTA list? We went back to winter today...snow on the ground and +3 wind chill right now
 
Status
Please reply by conversation.
Babadem

Problems setting up (AMC4)on 101.0w with GT-S40 LNB

  • Babadem
  • Replies: 13
O

newbie needs Ultra hook-up help

  • overthehill
  • Replies: 3

Similar threads

N
(NOOB) How do I apply voltage to ku band lnbs?
Replies
4
Views
351
mr_rye89
mr_rye89
oldsmobile
Anyone have a surplus DVB-S receiver cheap?
Replies
15
Views
2K
oldsmobile
oldsmobile
R
Is FTA still a thing
Replies
8
Views
2K
comfortably_numb
comfortably_numb
cyberham
FTA Contact in Japan
Replies
29
Views
2K
cyberham
cyberham
R
    • Like
My KU FTA system is back online.
Replies
4
Views
706
Borisov-54
Borisov-54

Latest posts

Share this page

Share this page
Top
Back