Any HD receivers with interactive and No DVR?

A separator won't work to feed both tuners without a DishPro Plus switch at the head end. I see a DPP44 in your future. Or maybe the cheaper DPP33 if you can find one for the 2 dual-tuner receivers. What switches are you running now? DP34's? I ran happily for years with a DP34 cascaded to a DPP33.

The house's with the VIP612's have DPP44's

Rob
 
If you have more then 3 receivers, you will need an extra switch(DPP44 or 34, 33 etc). If you have 3 receivers, even duo's, the switch built into the LNB should be fine. How I have always understood it is for every 2 tuners, is one port on the LNB, of a DPP LNB, and the DPP LNB has the switch built in.
 
The house's with the VIP612's have DPP44's

Rob
That's why those are working properly. When you use a dp lnb with a dual tuner receiver, each satellite input needs its own feed from the lnb. If you could run off a 44 or 33 switch with your current setup, the receivers would work like they should.

Posted Via The FREE SatelliteGuys Reader App!
 

Remote stops working with Joey .... reset to cure?

Joey Double Inputs

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)