Alignment Problem???

[CatvGuy]

I just changed out a basic single LNB dish for a SlimLine 5 LNB Dish. I used a basic receiver to peak the new dish and was able to get near 100% on 101, 110 & 119. I was unable however to get the Receiver to then find the satellite signal???? I went out and purchased a New HD/DVR and thought it would help guide me through the set-up - getting me to the proper settings in hopes of getting it right. The problem is most likely fine turning of the dish, I'm looking for confirmation. Though when checking for satellite signal to the transponders - very, very few are showing. I believe I should see signal on every other transponder on each satellite. Is that correct. Am I needing to get a Tech involved with a Bird Dog meter or can I tweak the elevation and azimuth and likely find the missing transponders?

 

[bateau980]

See my response in your other thread - Here

BTW,