Hello, First, Thank you for all the info in this thread.
I have been spending days on the roof trying to point my Dish to IA5, so far I have not been able to lock any channel upon scan. I purchased a SF-95 signal meter today that would take a week to get here mean time I can use any help and advise. I have:
(A) samsonic 30” dish.
(B) Ku-BAND LNBF (RF:11.70/12.20GHz – IF:950/1450MHz – L.O.:10.75GHz – Gain 55dB – Noise Figure:0.5dB) by viewsat Dual Coax connector
(C) 4 feet coax from LNB + coax connector + 12 feet coax to receiver (no switch)
(D) Twinhan PCI DVB card (measured the output voltage at 12 DC volts)
(E) Windows XP, TwinhanDTV Version 2.606
I live in zip code 92117 and tried my best (Guessing) to point my dish to Azim:132 degree (145-13) Elev:46 degree. I also rotated my LNB about 30 degree counter-clockwise for polarization. The best signal strength I was able to point my dish to ranges from %70-%72 (according to TwinhanDTV software). My quality bar stays at %0 while strength fluctuates from 68%-74%.
Question 1: is the following LNB Settings in TwinhanDTV software correct?
Satellite: IA5 (2630)
LNB Power: ON
LNB Type: Custom
LNB1: 11700
LNB2: 12200
Question 2: shouldn't “Signal Strength” changes when I scan different satellite? (it always stays in about 71%, no matter what bird)
Question 3: I heard that direcTV signal is very strong and I might be pointing to DirecTV? If so don’t I need a circular LNB to pickup DirecTV signal? If I am aiming to DirecTV at 101 degree, will I be able to move my dish 4 degree to west to aim at 97 degree (IA5)?
Thank you. Sorry for the long post.
I have been spending days on the roof trying to point my Dish to IA5, so far I have not been able to lock any channel upon scan. I purchased a SF-95 signal meter today that would take a week to get here mean time I can use any help and advise. I have:
(A) samsonic 30” dish.
(B) Ku-BAND LNBF (RF:11.70/12.20GHz – IF:950/1450MHz – L.O.:10.75GHz – Gain 55dB – Noise Figure:0.5dB) by viewsat Dual Coax connector
(C) 4 feet coax from LNB + coax connector + 12 feet coax to receiver (no switch)
(D) Twinhan PCI DVB card (measured the output voltage at 12 DC volts)
(E) Windows XP, TwinhanDTV Version 2.606
I live in zip code 92117 and tried my best (Guessing) to point my dish to Azim:132 degree (145-13) Elev:46 degree. I also rotated my LNB about 30 degree counter-clockwise for polarization. The best signal strength I was able to point my dish to ranges from %70-%72 (according to TwinhanDTV software). My quality bar stays at %0 while strength fluctuates from 68%-74%.
Question 1: is the following LNB Settings in TwinhanDTV software correct?
Satellite: IA5 (2630)
LNB Power: ON
LNB Type: Custom
LNB1: 11700
LNB2: 12200
Question 2: shouldn't “Signal Strength” changes when I scan different satellite? (it always stays in about 71%, no matter what bird)
Question 3: I heard that direcTV signal is very strong and I might be pointing to DirecTV? If so don’t I need a circular LNB to pickup DirecTV signal? If I am aiming to DirecTV at 101 degree, will I be able to move my dish 4 degree to west to aim at 97 degree (IA5)?
Thank you. Sorry for the long post.