8 Dish FTA Setup Problem

[jeffadelic]

I hope someone can help me with the project i would like to start.
i want to hook up eight satellite dishes using two Diseqc into my FTA receiver .
There will be four dishes on each Diseqc switch .
What do i need to put in between the two Diseqc to switch back and forth from the satellites .

Any help would be appreciated .




Jeff

 

[Mr Tony]

dang..what satellites are you aimed at?

You would need 2 4x1 switches and a 22k switch

 

[dem0nlord]

Actually he should need 4 22k switches and one 1x4 diseqc.

 

[mrweather]

dang..what satellites are you aimed at?

... Says the man with 13 lnbs on a T90!

I didn't know you could put a 22 kHz switch ahead of a Diseqc? At least it didn't work for me when I tried.

 

[SatinKzo]

http://www.digware.com/product_info.php?products_id=147&osCsid=27d422ed1a52a1fcac884c8a49519a50

Would that work?>

 

[Mr Tony]

... Says the man with 13 lnbs on a T90!

I just asked. i always like to see what other options people have set up

I didn't know you could put a 22 kHz switch ahead of a Diseqc? At least it didn't work for me when I tried.

Ah crap you’re right. I tried the 22k before the diseqc and it didn’t work. So you would need 4 22k switches and one diseqc switch

 

[SatinKzo]

Labgate on here had something on this and similar at one time?

http://www.labgate.info/
The graphs section has some setup diagrams