.75M Channel Master need parts

[RidgeRunner]

I have what I believe is a .75M channel master it is marked .75M-1 it also have another model # 6195-27. I measured it just under 30 inches. It is also marked Channel Master.

The plastic LNBF holder is broken, and I'd like to replace it. Does anyone have any suggestions where I could find one. I only found one hit on google and the website appears to be down.

Thank you

 

[Hockeynut]

Start a conversation with me...I have an inventory of these dish`s and parts that need to be thinned.

 

[phlatwound]

If Mr. Hockeynut can't fix you up you may try Impakt Products.

https://impaktproducts.com/home.php

 

[RidgeRunner]

I've PM'd Hockeynut. We'll see where this goes first. Thank you for the assistance.

Sent from my SM-G935V using the SatelliteGuys app!

 

[Hockeynut]

This the one?

 

[RidgeRunner]

Looks pretty close....

Sent from my SM-G935V using the SatelliteGuys app!

 

[Hockeynut]

What is the ID of the lnb holder?..There were a couple diff lnb brackets for that dish..Do not have any of those spares the best I can tell from the pic.The extra brackets I have will work but a change of lnb and feedhorn with a C120 flange is needed..Can you throw some calipers and measure the ID to confirm?...Or what is the OD of the lnb that has been used on this dish?..

 

[RidgeRunner]

Measured the ID of the holder and it'd 1.5 inches. I Also measured the OD of the old lnbf which I will not use....because I'm going to buy a new one. That measures a little lager than 1.5 inches which makes sense since it would need to clamp tight.

Sent from my SM-G935V using the SatelliteGuys app!

 

[danristheman]

Hockey nut do you that lnb holder for a 1 meter dish?

 

[RidgeRunner]

If Mr. Hockeynut can't fix you up you may try Impakt Products.

https://impaktproducts.com/home.php

I looked there and didn't see anything for my dish. Do you have a link for one?

Or were you just providing the vendor in case they did have one?

Thank you

Sent from my SM-G935V using the SatelliteGuys app!

 

[RimaNTSS]

Another day I've made LNB holder for 1,2m CM dish. I think something like that is also possible for smaller dish.

 

[Hockeynut]

Ridgerunner the link phlatwound sent you does not sell the the bracket you are looking for but those dish`s came with 2 diff styles.The bracket I have would work with this lnb.

https://impaktproducts.com/Eagle-Aspen-270-Ku-Band-Dual-Output-Linear-LNBF-ON-SALE-p-16619.html

 

[Hockeynut]

Hockey nut do you that lnb holder for a 1 meter dish?

If it is the holder that ridgerunner posted a pic of then no I do not have any.All of those are tied up on many of my 1.0 and 1.2 meters with Invacoms.

 

[RidgeRunner]

My friend who does work for the paging industry told me if I struck out on satellite guys to try him next. He still has contacts there and that is where my dish came from.

Sent from my SM-G935V using the SatelliteGuys app!

 

[RidgeRunner]

I guess my other question is how do know if a LNBF I purchase will fit my holder?



Sent from my SM-G935V using the SatelliteGuys app!

 

[Cham]

I just used longer bolts in the LNB clamp to fit a regular Ku LNBF using the bracket Hockeynut posted.

 

[phlatwound]

...Or were you just providing the vendor in case they did have one?...

Yeh, I just threw them out there, knew they had some stuff for those dishes but wasn't sure exactly what.