I've got a 722. Is there any way to improve the signal the 2nd TV remote is getting from the receiver? 722 unit is on the 2nd floor, secondary TV is on the 1st floor, aprox 40 ft away, straight line distance. Can the 2nd TV antennae be enhanced in some way?
722- 2nd remote not working well
- Thread starter danderson101
- Start date
- Latest activity Latest activity:
- Replies 5
- Views 2K
Try band "B" on the 6.2 or 6.3 remote. If that doesn't work, move the antenna into the room with the TV2.
Instructions:
http://www.wowvision.tv/TV2 Tipsandtricks.htm
Instructions:
http://www.wowvision.tv/TV2 Tipsandtricks.htm
If you can't find what you want, pm me and give me your e-mail address I e-mail a drawning of how I did it with two dixpler and some cable.
Where is the antenna?
My installer put it on the RF Out on the back of box. The signal had to shoot through the box and other A/V equipment. I extended it with a six foot RG6 cable and stuck it behind the top edge of the TV with double-sided tape.
It works fine now that it has a straight and unblocked shot.
My installer put it on the RF Out on the back of box. The signal had to shoot through the box and other A/V equipment. I extended it with a six foot RG6 cable and stuck it behind the top edge of the TV with double-sided tape.
It works fine now that it has a straight and unblocked shot.
My 2nd TV is in the basement right by my patch panel room and my main TV is on the first floor. I have extra RG6 running thru my house so could I connect some to the 722 and put the antenna in the basement to improve my 2nd remote signal?
Thanks
Greg
Thanks
Greg
