58.0w problems

[suzukiice]

hi guys. I'm new to the forum so please help me out. I am trying to get 58.0w on my coolsat 5000. The dish is in the correct position and it works fine with my Sharp LNBSHP01 lnb but some of the channels are "missing"(not being received), however when i use my digiwave DGL-990D i get all the channels but they come in on CONAX or CRYPTOWORKS and they dont show. How can i fix this?


Digiwave DGL-990D specs are

RF:11.70/12.20 GHz
IF : 950/ 1450 Mhz
LO: 10.75 GHz
Gain: 60dB
Nosie Figure: 0.6dB

hope this helps you to help me

 

[Lak7]

...but they come in on CONAX or CRYPTOWORKS and they dont show.

Conax and Cryptoworks are encryptions, used for subscriptions, and are not FTA.

 

[Mr Tony]

only KU channel on Pas9 is Cubavision Int'l

 

[suzukiice]

only KU channel on Pas9 is Cubavision Int'l

it showed with the lnb sometimes then stops why is that?

 

[qwert1515]

Do you have a love signal quality? Are you using a Universal LNB?

 

[suzukiice]

Do you have a love signal quality? Are you using a Universal LNB?

not too sure about the love signal thing but i am on the sat


yes i believe it is universal

 

[Mr Tony]

so are you picking up 58 now?

 

[qwert1515]

Sorry, it should have been "Do you have a low signal?"

Also did you change the LO Frequency on the Digiwave DGL-990D from 10.75 GHz to 10.60 GHz for the universal LNB?

 

[suzukiice]

Sorry, it should have been "Do you have a low signal?"

Also did you change the LO Frequency on the Digiwave DGL-990D from 10.75 GHz to 10.60 GHz for the universal LNB?

yea i did

yes i was pickin it up iceberg,...the channels show then the CAS changes to conax...

 

[jayelem]

What channels were you trying to pick up ?

 

[abel33]

how did you possitioned the dish?