I posted this question in the FTA section, PBS and Iceberg answered my initial questions about using the elliptical dish for 121, but I think it fits here. Currently, I am using an elliptical Hughes dish (21" x 36") with a circular LNB to get the dish network international from 148, I am getting about 95-113 on the different transponders using a 3900 receiver. For the 110/119 I am using a dish 500 with a dual DSS LNB and both feeds are switched with a SW21.
Now I wanted to use the 121 instead of the 148 so I tried to replace the circular LNB with an FSS LNBF (Zintech ZKF-F22, R.F. 11.7-12.2 Ghz, IF 950-1450 Mhz, L.O 10.75 Ghz) using the 21"X 36" dish and adjusting it to face 121. Now here are the issues: the 3900 setup when I chose 121 it mentions wrong satellite dish network 119 despite it shows a 95 signal but red. When I chose 148 it displays wrong satellite dish network 121, 85 signal but red. Checked the switch which never detected the 121. Also I reseted the 3900 receiver but couldn't get the 121 to turn green. what am I doing wrong? the 3900 is upgraded and displays the dish 500 and superdish.
Any help? Thanks.
Now I wanted to use the 121 instead of the 148 so I tried to replace the circular LNB with an FSS LNBF (Zintech ZKF-F22, R.F. 11.7-12.2 Ghz, IF 950-1450 Mhz, L.O 10.75 Ghz) using the 21"X 36" dish and adjusting it to face 121. Now here are the issues: the 3900 setup when I chose 121 it mentions wrong satellite dish network 119 despite it shows a 95 signal but red. When I chose 148 it displays wrong satellite dish network 121, 85 signal but red. Checked the switch which never detected the 121. Also I reseted the 3900 receiver but couldn't get the 121 to turn green. what am I doing wrong? the 3900 is upgraded and displays the dish 500 and superdish.
Any help? Thanks.