Search results for query: *

Will the Gospell GCF-D12T LNBF give better results ? --I would like to know if the Gospell GCF-D12T LNBF (with C_band only) will perform better with more signal quality than a BSC621-2 ?

Thanks for the Help, The Dish Is Back in Service. Thanks for the helpfull information: I got C_Band working for the very first time , the Andrew dish is back in service I gave up with the Focus 10750-Ku-band LNB , got nothing likely because its not designed for the dish. So I put the C-band...

Do these big dishes need to use the Clarke Belt set-up just to be able to lock onto 121`W or 103*W for DVB C-band channels ?

Yes that is a WallMart floor jack being used to set elevation. As I do not want to bother with the Clark Belt setup, I don't have the motor , the dish hunter I bought it from for $25.00 , must have kept it. I hope it will still work for 103*W or 121*W C-band , just by manually pointing and...

Thanks for the Info , now I know it is 10ft not 12ft. I am going to buy a brand new C-band only BSC621 today , because I want to enjoy receiving those C-band DVB-Ch's on 121*W and 103*W. The dish is not dented or dinged, but the scaler that holds the LNBF is not properly flat. My dial-up...

Thanks for the Help, The Dish Is Back in Service. Will this dish be good for C_band , and does anyone use this same dish? Will a Ku LNB work on this type of dish for test only to lock on any Ku-Sat? I planed on using different dishes for C & Ku band's , so I have one big dish that I cannot...

Yes I got info for the Ku_Frequency settings yesterday from Iceberg (Universal or 9750/10600) Confirm you have this model, it's the Ku Universal model: Ku LNB L.O. 9750/10600 Yes to Lak7 : It has a label on the bottom with Model info: DMS BSC621-2 LNBF Confirmed . The Ku_band does not work ...

Thanks. Yesterday I tried the receiver directly connected to the connection on the tip of the LNBF , but I am going to try it with those settings you mentioned for the Ku. I read a previous thread by another member on this same page, : said he locked onto 123*W using 125*W Sat settings for...

Is my BSC621-2 LNBF Broke ? I am having problems with a DMS BSC621-2 LNBF I got for free with the 12-ft dish I purchased used. The Ku_Band seems to be dead with no active reading on the green strength bar when I set the Diseqc Number setting to #-2. Only the Diseqc #-1 or #-3 settings work...

Thanks Iceberg : for that LNB Freq. setting so I can test the Ku-band first before I switch to the Focus 10750 Linear LNB for that test, and I will set the Diseqc # to 2 for the Ku-band part of the DMS621-2, to see if it works.

When you mentioned "The trick with this unit is to get it positioned just right", are you refering to the Skew setting of the BSC621-2 ? And is the Polarity setting in the Antenna Setting page called the LNB Freq.-5150 ?

Hello I am looking for some helpful information , that will help me find out if the LNBF I received with my 12-foot Andrews dish works or not. By reading some info from here, I read that the metal box mounted on the bottom of my DMS-didital C/Ku_LNBF Mod-BSC621-2 is a Dual C-Band...

Thanks for the info. I prefer the 10750-Linear over the twin circular on my 36" dish for DVB Ch's on 123*W, as I believe it gives a stronger signal. I would like to find out more about S2 , because you mentioned it, I have not had the opportunity to watch any Feed Ch's yet, but I have...

Thanks for the information, I am going to view the List . I finished mounting the last 3-panels of my solid steel 8-panel 12Ft Andrew dish today, and it is big and beautiful. Each panel weighs 25lbs. I am going to mount the DMS-:BSC621-2 C-band LNB on it tomorrow, but first I need to mount the...