Search results for query: *

Yes you're correct Tron and over here in the UK, digital terrestrial TV is available as DVB-T. I just wanted to say that I followed the suggestions to rescan for the transponders on each LNB without the switch in place and I received all the transponders (horizontal and vertical polarisation)...

Hi voomvoom and thanks for your ideas, The labelling on the switch says that it is a DiSEqC 1.0/ToneBurst shielded switch with a terrestrial coupler. The four ports it carries are labelled as follows: 900-2150 MHz for LNB A 900-2150 MHZ for LNB B 40-860 MHz for the Terrestrial antenna I/O port...

Hi again Larry1, I'll try what you suggest and scan the channels on each satellite without the switch in place and then connect the switch afterwards and see if I can alternate between channels from both LNBs successfully. I have also changed the position of the second LNB from Hispasat at 30W...

I'm still having difficulties making the DiSEqC switch work properly for me so I'd like to ask whether the switch I have described in the post above is appropriate for what I want to achieve or should I replace it with a different one that is more reliable and contributors to this forum use...

Hi Larry1, Yes, as far as I'm aware it is a DisEqC switch and according to the product description it provides 2 satellite LNB inputs and a terrestrial coupler to connect a terrestrial antenna. Here's a link to an image of the device as well: http://www.maplin.co.uk/images/Full/a23fb.jpg

Thanks for your replies brentb636 and SatPhreak The DVB-S card I use is a Pinnacle Stargate Tuner and both LNBs are universal. I have looked at the diseqc settings of the DVB Dream program and filled in the appropriate entries for the LNB in port 2 but I still only receive the signal from the...

Hello everyone, I'm having some trouble receiving the signal from two LNBs I'm using on two different dishes pointing at 19.2E and 30W respectively. I'm using a DiSEqC switch to connect the LNBs to a Pinnacle PCTV SAT card on my computer but the DVB-S program I'm using only receives the signal...