Search results for query: *

Tried the unplug the cable and run the check switch trick. Unfortunately did not work. Had first dropout about 5 minutes after I got the programming back.

Nothing to lose. Will give it a try.

I get 98-100 on the NIMIQ 82W satellite, and 94-87 on the 91W. 82W has more dropouts than the 91W, but they both do it at times. Cable and connectors have been replaced.

Edmonton Alberta on Bell service. They use 91W and 82W NIMIQ. Most problems have been with the 82W, but some also on 91W. The main receiver is a Bell 9241, which really is a Dish 612 VIP from Echostar. I have another Bell receiver 6131, single tuner HD, which is dropping out at the same time...

My main receiver has 25 feet of Monster Quad copper shield, copper core RG6 cable. It replaced some 3 GHz RG6 used by Bell, and there was no improvement. All connectors replaced too.

"The top culprits are: 1. Misaligned Dish 2. Faulty Switch 3. Cable problem (loose connections faulty cable cable too long and needs a power inserter etc...) 4. Faulty set top box. I had the same problem after a recent storm and had the dish realigned and now I have no problem." The hardware...

"All I could suggest is removing the INput cables, then run a Check Switch. After it fails, replace the INputs and run it again." Thanks for the suggestion. What would that do? I'm having the same problem on two different receivers coming from the one DishPro Plus Twin LNB.

I think the tree problem is a perfect explaination of what I see happening. My problem however is that there are no trees...

Have DishPro Plus Echostar hardware, and everything has been replaced from the LNBF to the receiver. However I am still having very brief, one second or so, loss of signal incidents - up to 10-12 times an hour. What seems to be unique about it, is that it is HD channels only, and the signal...

I found this Sun Outage Calculator and selected the 81.98 W NIMIQ 4 Satellite Position. And at the bottom of the map I put my address in. It came back with sun outage times of around 11:45 AM starting October 7th, and going to October 16th. This was around the days I first noticed the problem...

Rod, If I am doing my conversions of time correctly that should be in the range of 13:10 to 13:20 local Eastern DST. That would seem to be in the range of time when there could be interference. One of the worst times I saw dropouts on 1564 however was between 9:00 and 9:30 PM, or way past...

Rod, can I bother you to tell me what the gist of it is? I used to belong to that digital home site 6-7 years ago, and asked to have my account closed. As a result the moderator banned me, and now I can't even look at the messages there.

Thanks for the feedback. I'm thinking because I've replaced everything at the house, it must be a satellite or Bell problem. Have been checking using Menu 6-1-1 on the satellite feed for the problem channels I've found and others have listed. Some listed below: Station - Number - Satellite -...

I tried watching 1053 yesterday PM and got no dropouts over the 30 minutes I watched. However I then watched 30 minutes of the CBC HD 1564 which has been the worst for me, and it was right at the end of the 30 minutes that it dropped out. So, in general the system seems to have good stretches...

I have a 9241 and do not have any phone line connected to it. The software updates, program guide updates, and subscription changes come via the satellite. The phone line is needed if you want to order pay per view using the channel guide. I consider not being able to do that a good thing!!

I've tried that once on CNN HD. The signal was 98-100 but I did observe it to drop to zero and become unlocked. The CNN HD was dropping much more frequently than normal (weather was good though), and I'm not totally sure it was the normal dropout issue I am suffering with. I will have to see if...

For the past 3-4 weeks we have been experiencing split second dropouts of signal on some HD Channels. The screen just flickers, but does not bring up an error message, and the audio drops out long enough that you miss a couple of words of speech. The CBC HD news channel (1564) is the worst and...

Bell agreed that the system needed to be grounded. A service rep came today to check the installation and ground it "properly". I was impressed that they would send someone out on a Sunday. In any case when he got here and we discussed what he was prepared to do, we could not agree on the...

Yes, I would say so. I am essentially having the same problem on the older 6131 receiver and second TV. The TV is also HD but a different brand, and connects to the receiver with component video cables, and a simple L/R RCA cable. There is no separate sound system, just the TV itself. It is also...

Our closest neighbour uses a fiber optic system from the legacy phone company. We are about 15 miles from an airport, but basically have a clear sky in front of the dish. Bad weather is the only issue that has caused a problem in the past. However weather causes signal loss for minutes and more...

Checked the wall plug and it is wired correctly. Power is fed through a power bar and surge protector. The TV and receiver are polarized three prong plugs. Also checked the resistance between the ground prong on the receiver and the RG6 shield connector. It was less than 0.1 ohms, about the...

DP Plus Separator was replaced today. No change to the dropouts. Watched 30 minutes of news this evening on channel 1564, a high definition channel that has been problematic. There was a dropout at the following times: 9:01 9:02 9:03 9:17 9:25 9:27 Is this normal? Bell is now wanting to blame...

I found some information which says a ground (#6 copper wire) is required to meet our Provincial electrical code. It must go from the dish to the house ground. That is not going to be cheap or convenient. I'm guessing the purpose of the ground is for protection against a lightening strike. Is it...

I am trying to troubleshoot a split second dropout problem without success. Essentially every component except for the physical dish has now been replaced. But in looking at this thing, I do not see anywhere this setup is actually grounded. The only possible ground would be the shield side of...

A replacement receiver arrived today. It turned out to be a refurbished unit with a lower serial number than the one I had installed nearly a year ago. Installed it, and set it up. Essentially the same dropout problem is still there. Called Bell and discussed the issue for the third time. The...