viewsat 2000 and superdish config issue

Status
Please reply by conversation.

dogboy

New Member
Original poster
Jan 11, 2006
1
0
I have a Viewsat 2000 and a DN SuperDish 121 with a DP334 switrch.

I can program in the 110 and 121 satellites and the 119 is sporadic. most of the time when doing a channel scan it does not pick up alot of the channels on the 119 (mainly ones at the Tp 12224. I am playing with many of the settings under the antenna configuration. Sometimes I can get a lock but only if I change the tp to something higher such as 12239. I also have a question about setting up the various tp settings. I see on Lyngsat it will give the letter "R" or "L" with the tp freq but when I set the tp freqs I only have "H" or V" or auto. Can someone help me with this too. Is there a page for learning the basics of FTA etc
 
Status
Please reply by conversation.

Alantic Bird 1 Transponder.

True South Satellite for new location

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts