Using same cable line with two different satellites

[Meho]

I currently have DirecTV. One cable runs from satellite dish to the junction place where it is farther distributed thru the house to 3 receivers. I have just added another dish which is for Globcast channels. Can I run the cable from Globcast dish to the same junction place where I have hooked up the DirecTV and than use the same cable that runs thru the house to distribute signals from two different dishes?

 

[harshness]

Short answer: No.

Long answer: Hell no!

 

[Jimbo]

What frequencies does the Globecast run ?

 

[jdspencer]

Maybe someone in the FTA forum can answer the question.
But, i suspect it will be the same answer you received above.

 

[yujiro1982]

i think you can use a diplex splitter for that I know it's good for cable and satellite, but i don't know if it's good for two satellite signals

 

[harshness]

i think you can use a diplex splitter for that I know it's good for cable and satellite, but i don't know if it's good for two satellite signals

Because the control signals (varying DC voltages and/or tones) would also be shared, there would be some very confused LNBs at the other end seeing signals from the wrong receiver.