hi,guys i am at my wits end,i have everything set up for all satellites,thats programed in my receiver,lnb configuration is set etc. when i go outside and turn my dish with my satellite finder,i get a good signal,go back inside,scan my satellite....nothing...i have been doing this all day,yesterday i received the pentagon channel and have not received any thing else is it any thing i am doing wrong,.....i need help
trouble locking satellite signals
- Thread starter icu1954
- Start date
- Latest activity Latest activity:
- Replies 7
- Views 1K
- Status
Try taking sat receiver and a small tv out to the dish connected with a short cable and try again. This way you can SEE what your signal meter is seeing.
EDIT:
Duh, I didn't see that you double posted this yesterday and already got the same answer as mine.
http://www.satelliteguys.us/free-air-fta-discussion/228816-i-know-i-am-newbie.html#post2335993
EDIT:
Duh, I didn't see that you double posted this yesterday and already got the same answer as mine.
http://www.satelliteguys.us/free-air-fta-discussion/228816-i-know-i-am-newbie.html#post2335993
Last edited:
I will echo TantalusFld's comments. Take the satellite receiver and small TV out to the dish so that you can see on screen what the signal quality meter in the receiver shows. I've tried using some cheap $10 satellite finders, and have found that they're not very helpful. I use the satellite signal quality meter on screen to watch for when I've got signal.
ICU,
A question to you... Are you setting up a single, fixed point dish or a motorized dish?
If a single, fixed point dish, which satellite are you trying to pull in?
If you are setting up a motorized dish, what are your site's coordinates and which satellite do you percieve to be your nearest true south satellite?
Also, what LNBF and dish and receiver do you have?
If you are using a motor, which motor make and model?
RADAR
Last edited:
hi,iam setting up a fixed dish,have a standard lnb, and have what i perceived to be the same 39" dish as a omega sat,which came from canada and a orasat 5.0 don't laugh i will update later...but let me ask you one thing...i am going right into my existing dish network wiring that's going into the house,i have disconnected the dish entirely,would this keep the info from from the dish from entering the receiver,like i said i did get the pentagon channel the other day.
I'd think the wiring is ok as you said "I got the Pentagon Channel" Have you tried using Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com to find your desired sat? Don't forget, with a Az-El mount, you also have to "skew" the LNB.
We are coming close to time for sun conjunctions. Not that that is your issue, but you may want to try peaking up when the sun is closer to the horizon.
Other than the above posted recommendations I just can think of know what you´re aiming at, make sure you know a strong tp on the sat you´re trying to lock in, ensure you have the proper tp info to lock on the right signal. 
- Status
