We have a Dish 625 DVR in Single Mode .
Up-to-date software Version: L540 .
After the most recent software update ( L540 ) the Time Available on the DVR Menue screen drifts downward as I switch channels and switch ( Swap button ) between the two tuners .
i.e. 4h 00m .... 3h 59m ... 3h 57m ... etc.
It behaves as if the dvr is not totally erasing / ignoring the data recorded from the previous channel after the channel is changed ... Or it could be a simple software glitch .
A soft reset restores the Time Available to the correct value, but then the value continues to drift lower as I watch and switch channels .
Any memory discrepancy in the dvr is of concern to me since we have quite a few recordings on the dvr .
I have tried both soft resets and hard (unplug) resets .
Thank you .
Up-to-date software Version: L540 .
After the most recent software update ( L540 ) the Time Available on the DVR Menue screen drifts downward as I switch channels and switch ( Swap button ) between the two tuners .
i.e. 4h 00m .... 3h 59m ... 3h 57m ... etc.
It behaves as if the dvr is not totally erasing / ignoring the data recorded from the previous channel after the channel is changed ... Or it could be a simple software glitch .
A soft reset restores the Time Available to the correct value, but then the value continues to drift lower as I watch and switch channels .
Any memory discrepancy in the dvr is of concern to me since we have quite a few recordings on the dvr .
I have tried both soft resets and hard (unplug) resets .
Thank you .
Last edited:
