I am aware that you can connect a H25 to your LAN using DECA, but I am curious if the receiver will fallback to streaming on signal outage.
Has anybody tried this?
EC
Has anybody tried this?
EC
I was afraid that would be the case. It looks like I'll be looking for 16 H44-COM receivers and a DCC...Only Genies & Gemini work with signal saver, legacy/Hx2x receivers do not.
It's an interesting option, but we don't really need 4K, but I do want the Signalsaver. People get cranky when these channels drop out and I don't have a ready backup.For commercial accounts, you might want to look into the H26 receiver. We don't know much about it as residential customers, but that is the latest commercial receiver.
According to a dealer on Claude's dealer board, SS DOES now work on the H26's. BUT, do be aware that there is NO internal DECA on the sat input...so you'll either need an external DECA on each receiver, or run an ethernet cable to each one.It's an interesting option, but we don't really need 4K, but I do want the Signalsaver.
LMAO people go through the roof when there channels drop out. then there on facebook advising against people from signing up and there ripoffs ect ectIt's an interesting option, but we don't really need 4K, but I do want the Signalsaver. People get cranky when these channels drop out and I don't have a ready backup.
SignalSaver does not work on all channels. An example is the Marquee Network only has the option to go to low resolution SD.It's an interesting option, but we don't really need 4K, but I do want the Signalsaver. People get cranky when these channels drop out and I don't have a ready backup.