Signal Loss TV2 on Model 522

[bowaters]

I am not getting a signal on TV2 on Dish Model 522. The signal on TV1 is fine. Setup is two dishes - 110 & 119 on one Dish and 61.5 on the other. There is one line coming into house to back of the receiver. A Dish seperator is used to split to TV1 and TV2. Dish Tech checked connections and said I need a new receiver. I am not sure this is the problem. Could there be another problem?
Thanks.

 

[volkodav]

no it is your receiver. but have you tried different dual tuner receiver at that spot?

 

[bowaters]

No. I haven't tried another dual receiver. Dish is bringing out a replacement one tomorrow. This is their fourth visit in trying to resolve this problem. They have done some rewiring and replaced the LNBF's and swithces so far.

 

[Jim5506]

Swap the lines from the seperator to the back of your receiver (plug TV1 into TV2 and vice-versa).

If TV1 then has no signal, it is either the short cable or the seperator.

If it is still TV2 without signal, it is your receiver.