rtpi go from 101

[nigel_miguel]

tp is 12060 H 22000 3/4 correct, this is what i have...
still 0

 

[Mr Tony]

I've got it at 12058 which is close enough
FEC I'd change to Auto instead of 3/4

 

[nigel_miguel]

12060 H 22000 and still nothing!!!!
quality

 

[Mr Tony]

All I can assure you is that it is there as of 3:00 CDT here in Minneapolis

sounds like the dish needs to be retweaked

 

[beavs2112]

Hi Nigel_Miguel I'm in London also and I get RTPI on my Ku system at 75% signal and 70% quality.

Kevin

 

[beavs2112]

Iceberg made a good point as usual. Lyngsat may be wrong. My pansat rcvr lists that transponder as 2/3 FEC. So just set yours to Auto FEC if the rcvr allows this. I'm not familiar with the models you have. The VPID and APID on lyngsat matched mine. Good Luck

 

[B.J.]

Right from the transponder's NIT

NIT: 97.0W 12.060 GHz Horizontal 22000 3/4 QPSK, DVB-S

The Lyngsat parameters are correct. 3/4 FEC locks for me, while no other FEC will lock.

 

[Keith Brannen]

I'm also in London, and I get 12060 H (12058 for me) at the same quality as I get 12177 V (12175 for me), both at 60% on the Pansat.

Nigel_Miguel, what quality readings do you get for some of the other Horizontal transponders (12090, 12121, etc.).

 

[srinath]

I'm in Montreal and I get about 60% to 70% in my ViewSat with my 1.2m Fortec