Question about dish alingment

[str8tshootn]

I got a fortec system (lifetime classic) and moved about 60 miles. Now I cant remember how I set the dish up. My
Latitude is 36.2 N
Longitude is 80.3W
Magnetic Declination is 8.1W
What numbers do I need to set my dish up with? I know I subtracted something form something...lol
Im using a DiSEqC 1.2. H-H Motor
Zip code 27045 (North Carolina)
All though I have had this set up since 2006 I still aint to swift with setting this thing up.
Thanks in advance for any help!
~Teddy

 

[Lak7]

A move of 60 miles really shouldn't change much. Here is a web page that can help.. Satellite Look Angles Satellite Heading Calculator Azimuth Elevation Skew Tilt LNBF Latitude and Longitude values Enter your location, select your motor from the Sat list(motors are at the bottom) and click GO

 

[concord]

What numbers do I need to set my dish up with? I know I subtracted something form something...lol
~Teddy

If your elevation on motor and dish was kept the same, just place it on your pole (make sure the pole is level).

I think you are referring to subtracting the declination from your magnetic south to get your true south position... i.e. 187 - 8.1 = 178.9. If you are using USALS, place dish pointing to true south location and move dish via USALS to a nearby sat (ie 97w) and move your dish left/right (by hand) in small increments pausing for a few seconds and check quality meter.

 

[str8tshootn]

I worked on this several hours today. The only thing I can pick up is Galaxy 18 RK 123.0W Im picking it up at 60 percent. When I go to other satelites, sometimes the most I can get is 13 percent. Im worried about adjusting everything and getting Galaxy 10 out of line. Any ideas?
Thanks,
Teddy