Hello... I have an old big dish, and i would like to do some tests on it.. Well i also have an Uniden UST-2200 and Ansat 1000p I would like to make 'em work. but i have no idea of how to connect 'em. If someone has a manual or have any idea of how to use 'em ill really apreciate any help! Tks!!!
Need some help
- Thread starter rk33
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
- Status
Is your big dish still connected/wired, or are you trying to put it up for the first time?
What kind of lnb (s) are on the big dish? Some pictures would help us figure out your puzzle. Mainly its just a matter of : rg6 coaxial cable to the dish lnb from your receiver & polarity control wiring, which is usually 3 small wires & & motor control for the dish motor(if it has an actuator/dish mover-motor). Ribbon cable which has all this wiring bound together in one cable is still available, that's the way it was usually done in the popular days of C-band tv.
What kind of lnb (s) are on the big dish? Some pictures would help us figure out your puzzle. Mainly its just a matter of : rg6 coaxial cable to the dish lnb from your receiver & polarity control wiring, which is usually 3 small wires & & motor control for the dish motor(if it has an actuator/dish mover-motor). Ribbon cable which has all this wiring bound together in one cable is still available, that's the way it was usually done in the popular days of C-band tv.
- Status
Similar threads
