NBC Mux on AMC 6 (72W)

Status
Please reply by conversation.

tamuin

SatelliteGuys Family
Original poster
Sep 23, 2008
41
0
Anyone receiving the NBC mux?

It is not coming up for me but I am getting Gospel Broadcasting Network so I a pretty sure I am on the satellite.
 
It's not watchable for me tonight, but I have it on an 18" dish due to my 30" dish being aimed too far away to include it. Other times it's fine, or even strong.

Here's the weird part: right now the gospel channel is strong for me. Normally, it's around the threshold, if not below it.
 
It's not watchable for me tonight, but I have it on an 18" dish due to my 30" dish being aimed too far away to include it. Other times it's fine, or even strong.

Here's the weird part: right now the gospel channel is strong for me. Normally, it's around the threshold, if not below it.
I bet if you ajust the dish you will bring in the mux and lower the signal on the gospel channel. I use this sat alot with my 500 dish and it is a matter of adjustments. I find this happen a lot on smaller dishes its like each transponder has a sweet spot on the dish. I'm in south NJ.
Mike Lib
 
That religious and shopping channel was very weak for me about 500pm today, only about 30% quality and breaking up, it's usually pretty strong. Other channels were fine.
 
Sometimes the same happens to me, i can receive the mux fine with a good 60-70 Q on a Pansat, but the next day without moving the dish i only have 35-40 Q, i just trimmed some olive trees in the backyard so i hope to get better readings (i'm using a 10 ft. prime focus with a C/Ku LNB South of California).

Cheers

Mike
 
I bet if you ajust the dish you will bring in the mux and lower the signal on the gospel channel.

I just did that last weekend. The weather here isn't doing anything today that it hasn't been doing all week, so I suspect the uplink is weaker tonight for some reason. If it doesn't straighten out in a day or so I'll bump the dish again.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top