Linkbox Missing LPB

[Dijmum1]

Hi,
Has anybody figured out why one can not receive LPB on SES 2 ? I have a linkbox 900i local and a Freesat
V7 combo receivers. I was receiving LPB up until about a month and a half ago but now I can't get the signal.
I have a one meter dish on a H-H 120 mount and a stationary 1.2 meter dish and neither one can get LPB. The stationary one is aligned to SES 2 as it receives other channels on that bird (the same for the one meter dish).
I changed out the disequc but that did not help. Would like to hear other suggestions on where I could have gone wrong or maybe it is not me at all. Miss watching it though.
Dijmum1

 

[KE4EST]

Welcome to SatelliteGuys!
I have not had a ku dish on that bird in some time. So others will have to chime in.

 

[comfortably_numb]

LPB is working fine on my 76cm Winegard dish. It's DVB-S2 and it's signal is weaker than other transponders on that satellite, so it does take a bit of work to tune in.

 

[Magic Static]

Watching LPB now on a V7 combo Q 72% with a 1.2m

 

[Phalaenopsis]

It’s coming in just fine on my Amiko with 49%Q on my 76cm dish.


Sent from my iPhone using SatelliteGuys

 

[Dijmum1]

I realign the 1.2 meter dish set in the skew and now have a signal/quality of98/96. Not need to figure out how much off the H-h antenna is so it comes in on that one. Thanks folks.