Hopper ota and setting recordings

[joshwright76]

Dish installed an ota adapter and antenna at my home and I get all my local channels.
But the guide only shows information for the current hour. How am I able to set recording timers on the OTA channels?
Thanks

 

[charlesrshell]

Dish installed an ota adapter and antenna at my home and I get all my local channels.
But the guide only shows information for the current hour. How am I able to set recording timers on the OTA channels?
Thanks

This is kind of primitive but I think it will work for now. Find a TV guide for your local channels. This is what I use. https://titantv.com. Find the show you want to record and then locate the channel and time slot in your Hopper guide and set the timer.

 

[JSheridan]

Dish installed an ota adapter and antenna at my home and I get all my local channels.
But the guide only shows information for the current hour. How am I able to set recording timers on the OTA channels?
Thanks

When was this installed? If it was today then you'll need a guide update. You can usually force a guide update by turning the Hopper and all connected Joeys off (standby). Also be sure there are no recordings scheduled for at least 30 minutes.

 

[comfortably_numb]

Note that once it's in standby, it sometimes takes 5-10 minutes for the guide download to start

 

[navychop]

The first 2 or 3 days can be a bit odd. Even for reading EHDs.

If this was installed more than a few days ago, and the standby doesn't work, we have a problem.


Sent from my iPhone using SatelliteGuys