On Monday Afternoon it finally arrived, my brand new ExpressVu 6200 Satellite Receiver! It came packaged in a brightly covered box which has my UPS guy asking questions, he couldn't believe they made a High Defition DVR.
I set it on the ground and snapped some pictures of the box then opened it up. Packed on top was a nice TV guide size manual in english and french for the unit, two remotes were packed in the foam side, there was a bag of accessories (cables, Batteries, UHF Antenna, etc...)
I replaced my Legacy Twin LNB with a Dish Pro Plus Twin then went inside to hook the 9200 up. I unhooked my old ExpressVu 6000 and placed the 9200 in its place. I used a DishPro Seperator and hooked up both Satellite Inputs.
Plugged it in and a few moments later I was greeted by a screen asking me to push the record button on my UHF remote (The UHF remotes are shipped with Random Address Codes preset, which is a smart idea!)
After getting that all setup I had a picture! I was surprised the unit came with the latest software (v141) I then sent an email and within an hour all my channels were activated.
I am having a couple of issues with mine though and I want to see if anyone else is having these issues.
1) The program guide is only going out for about 2 hours, then most channels have NO INFORMATION listed. I would like to search for programs so I can DVR them
2) No interactive on my unit. If I go to channel 550 it acts like there is no channel there. If I press the Interactive button on my remote it does nothing.
I have not hooked it up to an OTA Antenna yet, so I can't report on how thats working.
I have hooked the 9200 up to my Slingbox as well, now I can watch ExpressVu throughout my home and at work.
Here are some photos I thought I would share.
BTW the HD on ExpressVu is GREAT!
I set it on the ground and snapped some pictures of the box then opened it up. Packed on top was a nice TV guide size manual in english and french for the unit, two remotes were packed in the foam side, there was a bag of accessories (cables, Batteries, UHF Antenna, etc...)
I replaced my Legacy Twin LNB with a Dish Pro Plus Twin then went inside to hook the 9200 up. I unhooked my old ExpressVu 6000 and placed the 9200 in its place. I used a DishPro Seperator and hooked up both Satellite Inputs.
Plugged it in and a few moments later I was greeted by a screen asking me to push the record button on my UHF remote (The UHF remotes are shipped with Random Address Codes preset, which is a smart idea!)
After getting that all setup I had a picture! I was surprised the unit came with the latest software (v141) I then sent an email and within an hour all my channels were activated.
I am having a couple of issues with mine though and I want to see if anyone else is having these issues.
1) The program guide is only going out for about 2 hours, then most channels have NO INFORMATION listed. I would like to search for programs so I can DVR them
2) No interactive on my unit. If I go to channel 550 it acts like there is no channel there. If I press the Interactive button on my remote it does nothing.
I have not hooked it up to an OTA Antenna yet, so I can't report on how thats working.
I have hooked the 9200 up to my Slingbox as well, now I can watch ExpressVu throughout my home and at work.
Here are some photos I thought I would share.
BTW the HD on ExpressVu is GREAT!