dishtech4483 Member Original poster Jul 11, 2012 13 1 Oxford, Alabama Dec 7, 2012 #1 I did a fishnet install yesterday, as I set the modem up to range,etc, etc. I received an error message, cannot transmit to gateway. Any ideas?
I did a fishnet install yesterday, as I set the modem up to range,etc, etc. I received an error message, cannot transmit to gateway. Any ideas?
grohgreg SatelliteGuys Pro Aug 21, 2008 523 1 Dawson Springs, KY Dec 7, 2012 #2 Did you actually lock on the assigned receive signal? If yes, make sure your skew angle as clockwise (as seen from behind) rather than anti-clockwise. //greg//
Did you actually lock on the assigned receive signal? If yes, make sure your skew angle as clockwise (as seen from behind) rather than anti-clockwise. //greg//
stardust3 SatelliteGuys Master Pub Member / Supporter Lifetime Supporter Mar 7, 2006 8,728 7,172 ..... Dec 7, 2012 #3 Good possibility it didn't like your gps coordinates. They are critical with gen4 or whatever you want to call it.
Good possibility it didn't like your gps coordinates. They are critical with gen4 or whatever you want to call it.
dishtech4483 Member Original poster Jul 11, 2012 13 1 Oxford, Alabama Dec 8, 2012 #4 Turns out there was a provisioning outage in the area, rolled back the next day, reinstalled, viola' . In an out within 15 min.
Turns out there was a provisioning outage in the area, rolled back the next day, reinstalled, viola' . In an out within 15 min.