Hi all.
I live in Belize,
In order to receiver HD and SD I must be able to receive satellites 101, 99 and 103.
Of the 3 satellites I am only able to receive satellite 101. I have been using DTV here for over 15 years using Channel Master 1.2 dish. I know that Belize is out of the "regular" satellite footprints thus I may have some challenges.
I ordered a H24-700 Receiver, SWM3 lnb which came with a power inserter, i also went ahead and got a B Band converter but new that a SWM3 lnb did not need that converter.
of the 32 transponders on 101 and am getting 18 of them with reading from 80 to 99 degrees.
Nothing from 99 (c), Nothing from 103 (c)
The SWM satellite has 9 Transponders and all are showing reading.
Further investigation reveals that there is a tilt setting that I have not used being that channel master 1.2m dishes does not have a tilt configuration. Can this be the cause of not getting 99 and 103. I dont see why it is impossible not to receive 103 and 99 when i am getting 101.
Again online research leads me to Hawaii and Alaska where according to DTV one must use 2 1.2m dishes along with an Az/EL custom mount and custom 101/99/103 lnb kit.
I think the custom AZ/EL mount is to get the tilt on these 1.2m dshes, am i correct? If so I would want to do my own customization.
My AZIMUTH and ELEVATION for 101 is
210 degree (AZ)
65 degree (EL)
Let me hear from some experts now.
I live in Belize,
In order to receiver HD and SD I must be able to receive satellites 101, 99 and 103.
Of the 3 satellites I am only able to receive satellite 101. I have been using DTV here for over 15 years using Channel Master 1.2 dish. I know that Belize is out of the "regular" satellite footprints thus I may have some challenges.
I ordered a H24-700 Receiver, SWM3 lnb which came with a power inserter, i also went ahead and got a B Band converter but new that a SWM3 lnb did not need that converter.
of the 32 transponders on 101 and am getting 18 of them with reading from 80 to 99 degrees.
Nothing from 99 (c), Nothing from 103 (c)
The SWM satellite has 9 Transponders and all are showing reading.
Further investigation reveals that there is a tilt setting that I have not used being that channel master 1.2m dishes does not have a tilt configuration. Can this be the cause of not getting 99 and 103. I dont see why it is impossible not to receive 103 and 99 when i am getting 101.
Again online research leads me to Hawaii and Alaska where according to DTV one must use 2 1.2m dishes along with an Az/EL custom mount and custom 101/99/103 lnb kit.
I think the custom AZ/EL mount is to get the tilt on these 1.2m dshes, am i correct? If so I would want to do my own customization.
My AZIMUTH and ELEVATION for 101 is
210 degree (AZ)
65 degree (EL)
Let me hear from some experts now.