Dawnco 1.1m Satellite Dish?
- Thread starter concord
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 2K
- Status
Ku dream:
1.0 meter or larger, sounds like a must-have to me! - :up
Ya got pictures?
About the only down-side is if the owner wants a lot of money.
.... and how hard up you are.
$10 is pretty much a go, in my book.
If you really need one, and it's in superb shape, I might consider $50.
'Cause getting a new dish anywhere close to that size shipped in would cost more.
1.0 meter or larger, sounds like a must-have to me! - :up
Ya got pictures?
About the only down-side is if the owner wants a lot of money.
.... and how hard up you are.
$10 is pretty much a go, in my book.
If you really need one, and it's in superb shape, I might consider $50.
'Cause getting a new dish anywhere close to that size shipped in would cost more.
Anole,
It's new in the box for 30. I assume it's an offset dish; sent the guy an email asking for more info.
It's new in the box for 30. I assume it's an offset dish; sent the guy an email asking for more info.
still sounds good:
One of the members did recently order a 1.2m dish, and it got munched in shipping.
I say this only jokingly, but . . .
I'd open the box and put the dish face-down on a flat surface just to be sure.
I'd also measure the height & width of the dish.
A good commercial dish will be 1.1m wide... if it's called a 1.1m dish.
But, even getting a 36" dish shipped in, would be well over $50, so it'd be hard to say "no" to your offer.
Sounds like an attractive proposition.
If it's something you can use, and ya get it, show us some pictures! - :up
I suppose the only thing that might be a surprise, is if it's a prime feed microwave dish.
But, you will see that when you look at it.
That could give you a little trouble matching an LNB to, but not insurmountable.
The Invacom AF120 (?) feedhorn and any C-120 flange LNB would match it.
One of the members did recently order a 1.2m dish, and it got munched in shipping.
I say this only jokingly, but . . .
I'd open the box and put the dish face-down on a flat surface just to be sure.
I'd also measure the height & width of the dish.
A good commercial dish will be 1.1m wide... if it's called a 1.1m dish.
But, even getting a 36" dish shipped in, would be well over $50, so it'd be hard to say "no" to your offer.
Sounds like an attractive proposition.
If it's something you can use, and ya get it, show us some pictures! - :up
I suppose the only thing that might be a surprise, is if it's a prime feed microwave dish.
But, you will see that when you look at it.
That could give you a little trouble matching an LNB to, but not insurmountable.
The Invacom AF120 (?) feedhorn and any C-120 flange LNB would match it.
$30, I'd be there with my trailer as fast as I could drive, if it was within 50 or so miles of it. You can always use it for something, or trade it, lots of stuff... It's a dish, get it!
- Status
