darn sr 20000

[alsfta]

darn sr 20000 HELP!

DARN SR 20000! that's it, that's all I get. Here I am on E121 W (should easily get Galaxy 10R, I've pushed my SG2100 to the west a couple of steps) and the only SR I can get is 20000. Everytime I try a different SR no luck!

Running Fortech LNB 9750, 10600; Skystar2; Winegard 30" Nice signal, 78%, Listening to D121, right now on Mytheatre.

Can't get to Galaxy 10R because I can only get SR20000, also can't pick up any of the FTA @20000 on E121 W. Don't understand?
Help

 

[ken2400]

True BUT 119W is close and if you could change to a DTV/Dish Network LNBF you could be getting some music. Also 91W has some insteresting stuff on it.

Why can't you change the SR?????

DARN SR 20000! that's it, that's all I get. Here I am on E121 W (should easily get Galaxy 10R, I've pushed my SG2100 to the west a couple of steps) and the only SR I can get is 20000. Everytime I try a different SR no luck!

Running Fortech LNB 9750, 10600; Skystar2; Winegard 30" Nice signal, 78%, Listening to D121, right now on Mytheatre.

Can't get to Galaxy 10R because I can only get SR20000, also can't pick up any of the FTA @20000 on E121 W. Don't understand?
Help

 

[Mr Tony]

need more info

What kind of receiver 1st off

 

[docj2005]

let me see if i got this right..

You have a fortec universal lnbf
a SkyStar 2 pci card
30" dish and running mytheatre


have you checked your inf settings for the sat your on?

Please let me know what settings you have when you pop up MyTheatre..

right now it sounds like a software setting is wrong

 

[alsfta]

Hi Guys,

I'll answer both questions in this one reply.

I have a Skystar2 pci card and the settings in Mytheater is: lof1 975000 sw 1150000 lof2 1060000 (# zeros are right on the actual setting) for E121 W Cheers Al

 

[docj2005]

need to know

what is the ini file for the 121 setttings. does it show other transponder setting other than 200000

 

[Mr Tony]

I dont have a PC card so I cant comment on some of it, but shouldnt it be either
10750 or 10750000?

I know my Viacast it does everything in Khz (instead of Mhz) so I have to add 3 zeroes to the end of the frequency and LO frequency

instead of 10750 I put in 10750000 for LO frequecny and
intead of 11799 I put 11799000 for frequency