I got a Vbox X back about 2 or 3 months ago along with an LNBF for my 7.5ft SAMI dish. I hadn't tried to use the diseq settings in the receiver to move the dish until recently and man is that thing the s**tz or what. I had been just writing down each sat position then going to that number manually when I changed sats but last week I decided to try to setup the diseq thingie using my AZBox Elite and that thing works great. Only down side is that I can see that dish actuator life will suffer as it's making it easier to change satellites and I'm doing a bunch more of that now than I have been. Now, if they only made a UHF remote for these receivers...........
Just received 2 more Vbox Xs and one more DMX741s so my other dish will have that same setup in it very soon. When that happens the 4DTV 920 I've been moving that 10ft dish with will go into storage for another time.
Don't ya just love this technology stuff!!:up
Just received 2 more Vbox Xs and one more DMX741s so my other dish will have that same setup in it very soon. When that happens the 4DTV 920 I've been moving that 10ft dish with will go into storage for another time.
Don't ya just love this technology stuff!!:up